Austin Air The National Sleep Foundation (NSF) Bedroom Machine
For
people who want better quality sleep
The National Sleep Foundation (NSF) Bedroom Machine is the most
advanced filtering system that Austin Air has ever designed. It
was built to meet the requirements set out by the Johns Hopkins
University Medical School for ongoing studies in which the filtering
system must capture gasses and particles at the sub-micron level.
Every minute, over 250 cubic feet of air passes through 15 pounds
of activated carbon and over 60 square feet of true medical grade
HEPA, providing air so clean it could change how you sleep, which
could change your life. If it doesn’t, Austin Air will refund
your money within 30 days of purchase!
Due to the addition of a fifth level of fitration this unit does
a superior job trapping pet dander, pollen and dust mites; chemicals
like benzene, ammonia, dry cleaning solvents and other harmful
toxins; and odors from cooking and other sources.
STAGE 1 - Large Particle Pre-filter
Removes particles easily seen by the naked eye (e.g. dust, hair,
pet dander)
STAGE 2 - Medium Particle Pre-filter
Removes small to medium size particles (e.g. molds, spores, pollen)
STAGE 3 - Activated Carbon (15 lb)
Removes chemicals, gases and odors (e.g. sulfuric acid, ammonia),
traps smoke and VOC particles.
STAGE 4 - Certified HEPA (60 sq ft)
Removes 99.97% of all particles larger than 0.3 microns
STAGE 5 - HEGA Carbon Cloth
The High Efficiency Gas Arrestance cloth removes chemical pollutants
and provides an extra level of filtration before the purified
air is sent back into the room.
Available colors

Prices
Bedroom Machine $765.00
FREE GROUND SHIPPING in the continental
USA. *Contact us for a shipping quote
to other areas and expedited shipping.
buy
now
The Bedroom Machine Specifications
Efficiency: 99.97% efficient at removing
particulates as small as 0.3 micron, 95% efficient in removing
particulates 0.1 micron and smaller
Coverage Area: Cleans
up to 1,500 sq. ft. efficiently
Fan Rating: 400 cfm (cubic feet per minute)
Dimensions: Height: 23" Width: 14.5"
x 14.5"
Weight: 45 lbs.
FILTER SPECIFICATIONS
Type: 5-Stage Filter
Configuration: Large Particle Pre-filter
Medium Particle Pre-filter
60 ft. of Certified HEPA
Filter Life: 5 years under normal residential
use
Additional Features: Foam sealing gaskets
top and bottom
FAN & MOTOR SPECIFICATIONS
Fan Type: Centrifugal fan with 3-Speed control
Power Rating: 1.1 amps, 120 volts
Consumption: 135 watts at highest setting
Motor Type: Permanent Split Capacitor -
rated for continuous use at high RPM & long life
Loudness Rating: Low- Lower than 50 decibels; Medium- 55 decibels; High- 66 decibels
Additional Features: Motor mounted on shock
absorbers
CSA, NRTL and CE approved
HOUSING
Material: 22 gauge steel construction
Air Intake: 360° intake system
Air Output: One side, upper deck outlet
Filter Access: Bottom plate easily removed
Finish: Baked-on powder coat
|
|